移动式自动喷砂罐ZC-ZDPSG-300L
更新时间:1675999222
移动式自动喷砂罐ZC-ZDPSG-300L

设备介绍:

本机是引进了先进的德国技术;采用了直通型喷砂阀,彻底解决了磨料的堵塞,喷砂出口的速度可达200M/S;砂阀是喷砂机的重要配件,它的主要作用是控制砂料的开启及关闭、无级调整喷砂时砂流量的大小。砂阀质量的好 坏直接影响到喷砂机是否能正常工作,该型喷砂机采用我公司生产的砂阀,该阀采用美国SCHMIDT公司技术,具有质量 可靠、调整方便、维护简单等特点,是世界各国广泛采用的一种结构;该砂阀的开启由气压控制,其动作过程是,当控制 口有气压信号时,砂阀的活塞带动阀杆顶起,砂阀开启,通过调整调节帽的位置,就可调节砂阀的开启量,从而控制砂料 流量,砂阀的开启量可无级调节,在砂阀中与砂料接触的阀杆和阀套由硬制金碳化铝制作,提高了砂阀的使用寿命。

This machine has introduced advanced German technology; The straight-through sandblasting valve is adopted, which completely solves the blockage of abrasive, and the speed of sandblasting outlet can reach 200m/s; Sand valve is an important accessory of sandblasting machine. Its main function is to control the opening and closing of sand materials and adjust the sand flow rate during sandblasting. The quality of the sand valve directly affects whether the sandblasting machine can work normally. This type of sandblasting machine adopts the sand valve produced by our company, which adopts the technology of SCHMIDT Company of the United States. It has the characteristics of reliable quality, convenient adjustment, simple maintenance and so on, and is a kind of structure widely used in the world. The opening of the sand valve is controlled by air pressure, and its action process is that when there is an air pressure signal at the control port, the piston of the sand valve drives the valve stem to jack up, and the sand valve opens. By adjusting the position of the adjusting cap, the opening amount of the sand valve can be adjusted to control the sand flow rate, and the opening amount of the sand valve can be adjusted steplessly. In the sand valve, the valve stem and valve sleeve contacting with the sand are made of hard gold aluminum carbide, thus prolonging the service life of the sand valve.

工作原理

本机采用压送式喷砂(喷丸)机构,即利用压缩空气在高压罐内高速流动行成高压作用,将高压罐内的砂料通过输砂管 喷出,然后随压缩气流由喷枪嘴高速喷射到工件表面,达到喷砂加工的目的。

This machine adopts the pressure-feeding sandblasting mechanism, that is, the compressed air flows at a high speed in the high-pressure tank to act as a high pressure, and the sand in the high-pressure tank is sprayed out through the sand conveying pipe, and then sprayed to the workpiece surface by the spray gun nozzle at a high speed along with the compressed air flow to achieve the purpose of sandblasting.

适用范围

用于清理钢结构、模具、健身游乐器材。玻璃、石碑的雕花、船舶修造、桥梁、矿山、机械、石油管道、水利工程、 港口建设等除锈、喷花加工、去氧化皮、毛刺亦可用于喷涂、电镀前处理工序,以提高涂(镀)层表面的附着力所有的表 面处理。用于喷玻璃丸、强化光饰零件的表面。

Used for cleaning steel structures, molds, fitness and amusement equipment. Carving of glass and stone tablets, ship building, bridges, mines, machinery, oil pipelines, water conservancy projects, port construction, etc. derusting, flower spraying, descaling and burr removal can also be used in the pretreatment procedures of spraying and electroplating to improve the adhesion of the coating (plating) layer surface. All surface treatments. Used to spray glass shot and strengthen the surface of decorative parts.

设备优点

可以代替酸洗磷化工艺,没有排污费的问题。快速喷砂除锈,在改变表面粗糙度的同时,还可以去掉焊渣、毛刺、飞 边。效率高、成本低、质量好,是传统化学和手工除锈无法比拟的。喷砂后油漆质量好、涂层寿命长,是目前国际上采用 的通用工艺方法。

It can replace pickling and phosphating process, and there is no problem of sewage charges. Rapid sandblasting derusting can not only change the surface roughness, but also remove welding slag, burr and flash. High efficiency, low cost and good quality, which is incomparable with traditional chemical and manual rust removal. After sandblasting, the paint has good quality and long coating life, which is a common process method adopted internationally at present. 


相关推荐